Heat Transfer Printing film glue (release agent)

 

 

 

 

 

 

 

 

 

 

 

Model: P-110 Brand: Korean type of adhesive materials: PET, ABS, leather, plastic, rubber, fiber type
Implementation of the standards: the main agent of shelf life: 12 (months): solvent = 7:3 transfer temperature: 160 degrees
Solvent: Tincture ketene: toluene = 1:1 gravure thickness: 120 mesh -180 meshes
 
Thermal transfer PP glue performance requirements
Applicability can be widely applied to PP plastic and metal painted surfaces. Transfer of PP plastic, PP plastic in general is mixed recycled materials, and therefore has extensive characteristics of PP glue. (Domestic low-grade PP glue can only be used for the transfer of pure PP substrate, for substrate parameters renewable materials helpless).
Two, quick-drying, on a printing press on the playing characteristics of glue drying tunnel should have easy to dry. 
Three temperature transfer (160 ℃ -180 ℃) transfer when the temperature is lower, the better, the higher the temperature of the transfer machine rubber roller, the shorter the life.
, Clarity (transparency) transfer to the surface pattern is clear and bright, the glue does not affect the ink layer.
Strong adhesion transferred to the product surface layers, strong adhesion to the classics from the 3M tape test and 100 tests.
Applicable engraving (mesh 120-180)
Environmental thermal transfer PP glue performance requirements
The company's long-term sales agent in Korea, Japan, the production of the original single imported thermal transfer the glue (spend membrane gum), and provide technical advice.
This product adhesive type: PP, plastic, and other.
Packaging: 15KG metal pail.